Phil Martinson
Building a homemade wind generator is a new trend in normal households, although some people hesitate to use it. Well they should not, because this is the only way to reduce your power bills.
Construction is not as hard as it sound, because homemade wind generator consists of few parts which are easy to acquire and assemble.
- Hub and Blades
- Body
- Tail
- Tower
Yes, that's true, only four part and there is not much more to do also. Although I could tell you exactly how to make the wiering, but its against laws to talk about electrical connections online. Therefore you can read about it from one of the guides we have reviewed.
Building the Hub and Blades - This is somehow the easiest part, because you wont have to build anything yourself here. Whenever you buy a guide you will receive a list of sites from where you can buy hub and blades for very cheap price.
Body - This is usually made from Ventilation pipe, which is really cheap and easy to obtain. Although building homemade wind generator body is somewhat tricky, since you have to seal it properly
Tail - Building the tail part is relatively artistic, because there are hundreds of different designs to choose from. I usually cut my tail out from wood or PVC plastic which is really cheap. There are also other materials you can use for building the tail part.
Tower - seams like a enormous thing to build, but it is easy, because you only have to get a hold on a flagpole or smth. These items are usually really cheap and give good results.
I really recommend you to buy a correct guide like we offer here, because electricity is the hardest part to set up and a good in-depth manual will guide you through nicely.
I hope this helped you,
Phil Martinson
No comments:
Post a Comment